Your electrician in Chorley, Leyland and the villages between.
Rewires, consumer units, EICRs, EV chargers and commercial work. I'm Josh — one sparky, start to finish. The person who quotes your job is the person who turns up to do it.
What do you need doing?
Pick the closest one and I'll get straight back to you.
Registered, not just qualified
NAPIT registration means I certify and notify work myself.
Free quotes, fixed prices
No charge to look, and a price agreed before anything starts.
One person, start to finish
No subcontractors and nobody you haven't met turning up.
Local to Chorley & Leyland
Based near Croston, so most of the patch is inside fifteen minutes.
What I get called out for.
Domestic, commercial and industrial. Same regulations, same testing, same paperwork on all three.
Ask about your jobRewires & consumer units
Full and partial rewires, and fuse box upgrades to a modern board with RCBOs. A lot of the older housing round Chorley and Leyland still has wiring that predates the way we actually use electricity, and it shows up the moment you start testing.
EICRs & landlord certificates
Periodic inspection for homeowners, landlords and businesses, with the report explained in plain English rather than handed over as a list of codes.
Fault finding
Something tripping and nobody can work out why. Older properties and the villages are often the worst for it — circuits added piecemeal over decades with junction boxes buried where nobody would think to look.
EV chargers
Home charge points installed, tested and notified properly. Common round Buckshaw and the newer estates where the house came with everything except somewhere to plug the car in.
Sockets, lighting & outdoor power
Extra circuits, kitchen and bathroom work, showers and cookers, garden offices, outbuildings and external lighting that survives a Lancashire winter.
Fire alarms & emergency lighting
Installation and the periodic testing that goes with running a premises, scheduled around your opening hours where it can be.
Three-phase & industrial
Distribution boards, machine wiring, motor control and armoured cable runs. Units, workshops, farms and the growing sites out towards the mosses, where the kit has to cope with damp, dust and washdown.
Registered means you don't pay the council as well.
Most electrical work in a house is notifiable, which means building control has to be told about it. If your electrician isn't registered with a scheme, that's a separate application and a fee that lands on your bill.
Because I'm NAPIT registered I certify the work and notify it myself. You get the certificate, the council gets the notification, and nobody pays twice. It also matters years later, when you sell the house and a solicitor asks to see the paperwork.
What that gets you
- Notifiable work self-certified — no separate building control fee.
- The right certificate issued in your name on every job.
- Work covered by the scheme, not just my word for it.
- Registration you can check yourself before booking anything in.
How a job usually goes.
No surprises, and nothing starts until you've agreed a price.
You ring or send a message
Tell me roughly what's needed. If I'm up a ladder I'll come back to you the same day.
I come and look
Free, and no obligation. Quoting properly means seeing the job rather than guessing over the phone.
Fixed price, agreed first
You get a price before any work starts, and it doesn't move unless the job changes and you say so.
Done, tested, certified
Work tested, site left clean, and the certificate issued and notified where it needs to be.
What people say.
Most of my work comes from people passing my name on, which is the way I'd rather it stayed.
Josh is my go-to electrician for both my property portfolio and the commercial yards within my business. Nothing is too much hassle, whether it’s a small or large job. Would highly recommend to anybody, without hesitation.
Tommy, ChorleyJosh recently completed a full rewire for our new house. What a guy. Clean, tidy work and competitively priced — what’s not to like?
Dean, LeylandGreat guy, great work, great price.
Michael, Walton SummitRecent work.
A few jobs from around Chorley, Leyland and the villages. Everything here is my own work, photographed on the day.
Where I work.
Based near Croston, a couple of minutes off the A581. That puts Chorley one way and Leyland the other, both inside fifteen minutes, and most of my work comes from that stretch.
Chorley, Leyland & the towns
Chorley, Leyland, Euxton, Clayton-le-Woods, Whittle-le-Woods, Coppull and Farington. Terraces, interwar semis and town-centre commercial.
The villages
Croston, Eccleston, Mawdesley, Bretherton and Ulnes Walton. Older cottages, farms and outbuildings.
Newer estates
Buckshaw Village and Charnock Richard. Rarely remedial — EV chargers, garden offices and the circuits the developer didn't fit.
Out towards the mosses
Rufford and Tarleton. Growing country, so three-phase and cold stores alongside the period property.
Further out
Preston, Bamber Bridge, Penwortham, Lostock Hall, Longton, Hesketh Bank, Burscough, Ormskirk, Standish and Adlington. No extra charge for the distance.
Bigger jobs
For larger commercial and industrial work I'll travel further across Lancashire and into Merseyside and Greater Manchester.
Questions I get asked a lot.
If yours isn't here, ring and ask — I'd rather tell you straight than have you guess.
How much does an EICR cost?
It depends on the size of the property and how many circuits there are — a two-bed flat and a five-bed farmhouse are very different jobs, and commercial premises are priced differently again. Ring with a rough idea of the property and I'll give you a fixed price before booking anything in.
Do I legally need a landlord electrical safety certificate?
Yes. Rented property in England needs an EICR at least every five years, and you have to give the tenant a copy within 28 days. If anything comes back coded C1 or C2 you've got 28 days to get the remedial work done. New tenancy, new property, or a certificate about to run out — worth getting booked rather than left.
Do I need building control for a new consumer unit?
It's notifiable work, so somebody has to tell building control. Because I'm NAPIT registered that's part of the job — no separate council application and no extra fee for you. You get the certificate and the notification goes in automatically.
What does a C2 on my EICR actually mean?
Potentially dangerous. It hasn't caused a problem yet but it could, so it needs putting right — and the report stays unsatisfactory until it is. A C1 is worse: danger present, made safe there and then. A C3 is a recommendation only and doesn't fail the report.
Do you charge to come out and quote?
No. Quotes are free and there's no obligation. I'd rather look at a job properly than guess at it down the phone, and you'll have a fixed price before any work starts.
How far will you travel?
Around 30 miles from Croston, which covers most of central and south Lancashire, with no extra charge inside that. For larger commercial and industrial jobs I'll go further — easiest thing is to ring and ask.
Tell me about the job.
A few details is plenty. I'll come back to you, usually the same day. If it's urgent, ring instead.
07572 642795